Professional filter media for aquariums
Biological filtration

3DS

Porous ceramics. A home for biology.

3DS is a ceramic medium for biological filtration. Its porous structure provides a surface for microorganisms involved in nitrogen conversion. Use it as part of a filtration system matched to your aquarium or pond.

BET · 2850 m²/L1 L / 4 L / 6 L
Aqua Specto 3DS

3DS Filter Media — porous ceramic for biological filtration

3DS is a ceramic medium with an extensive surface area and a porous structure. It provides a substrate for beneficial microorganisms involved in biological water treatment. It is intended for freshwater and marine aquariums and garden ponds.

A mature biofilm supports the conversion of ammonia and ammonium to nitrite and then nitrate. This process requires oxygen and suitable water flow. Nitrate reduction through denitrification requires different conditions, including areas with limited oxygen availability, and does not occur automatically in every filter.

Surface area, dimensions and structure

The surface area stated for 3DS, measured using the BET method, is 2850 m²/l. This is a material surface parameter; it is not equivalent to the area actually colonised by bacteria or a standalone measure of the performance of the entire filter.

The pieces measure approximately 15 mm in diameter and 12 mm in height. The pore size stated in the specification is 20–30 μm. A three-dimensional network of open, interconnected pores facilitates flow and contact between the water and the medium's surface. Connections between pores of different sizes extend the ceramic's internal structure.

The porosity provides space for biofilm development. Its performance also depends on oxygenation, temperature, aquarium loading and protection against excessive sediment accumulation.

Material and manufacture

Al₂O₃ and SiO₂ are listed in the material composition. The ceramic is sintered at approximately 800°C. 3DS is designed as an inert medium and is not intended to deliberately change pH or mineralise the water.

A low content of alkaline earth metal oxides is a composition characteristic described in the specification. An inert medium does not mean that the parameters of the entire aquarium will remain constant without monitoring: other tank components and biological processes also affect them.

Nitrogen compounds and product materials

The gallery includes the original charts relating to NO₃⁻, NO₂⁻ and NH₄⁺. They show the trends presented in the product materials; they do not establish a guaranteed reduction rate or a safe concentration for every aquarium. Assess results in your own tank through regular water testing.

Where and how to use

3DS can be placed in canister filters, sumps, hang-on-back filters, trickle filters and other systems that provide flow through the medium. It can also be used in a suitably flowing area of the main tank.

Rinse off manufacturing dust before first use. Provide prefiltration to capture larger particles and avoid packing the medium too tightly. During maintenance, rinse gently in water removed from the aquarium; do not clean the entire biological bed at once.

Available sizes: 1 l, 4 l and 6 l. Product photographs, diagrams and a video show the structure and use of the medium.

Specifications and structure

MaterialPorous ceramics; main constituents listed in the specification: Al₂O₃ and SiO₂
BET surface area2850 m²/L — declared value for 3DS material
Element dimensionsApproximately 15 × 12 mm
Pores20–30 µm — size stated in the product specification
Sintering temperatureApproximately 800°C — according to the product description
Options1 L + BIOBAG, 4 L, 6 L

BET describes material surface area measured by gas adsorption. The entire value should not be equated with surface accessible to bacteria or with the performance of a complete filter. These figures come from the Aqua Specto specification, not an independent comparative test.

How to use 3DS — step by step

  1. Before first use, gently rinse the ceramics to remove transport dust. Do not use detergents.
  2. Check the direction of water flow in your filter. Place 3DS after a sponge or another stage that captures coarse particles.
  3. Fill a basket or suitable bag without packing tightly. Keep channels, seals and basket closures clear.
  4. Start the filter and check flow. When replacing old media, retain some mature media and make changes in stages.
  5. Monitor nitrogen compounds during maturation and after significant changes. Do not assume fresh ceramics allow an immediate increase in livestock.

Care and service life

Check the media for restricted flow during filter maintenance. If deposits obstruct it, gently rinse part of the media in water removed from the aquarium. The aim is to remove excess debris, not sterilise the ceramics.

Do not clean all mature media at once, use detergents or let the media dry out during routine maintenance. Replace damaged or permanently clogged pieces gradually. Cleaning frequency depends on deposits and flow, not a single fixed interval.

Frequently asked questions

Does 2850 m²/L guarantee filter performance?

No. It is the declared BET value of the material. Overall filtration also depends on pore accessibility, flow, oxygen and biological maturity.

Does 3DS replace mechanical filtration?

No. A sponge or other prefilter captures coarse particles and helps keep the ceramics open. The two stages complement each other.

Can I replace all the old ceramics at once?

In an established aquarium, gradual replacement while retaining some mature media and monitoring water parameters is the safer approach.

Choose an option

Current prices, availability and purchase details are provided on each variant’s Polish shop page.

Choose for your aquarium

Match media type and quantity to your filter, livestock and water measurements. Tell us about your aquarium.

Help with choosing ↗